Electrolux 5070 - Manual (Page 31)

Installation and Connection Instructions
31
• Depending on type, the dishwasher is to be installed as follows:
Dishwashers That Can Be Integrated
(see installation template supplied)
3 The door of the appliance can be fitted with a wooden/facing panel
with the following dimensions:
1 If the facing panel is longer than 600 mm, the door of the appliance
cannot be opened completely (the facing panel bumps against the
plinth).
If this is the case, the plinth must be cut out (see installation template)
or the brace adapter for the extra long door BLT 60 must be used.
You can obtain this with the E No. 911 239 008.
Built-In Dishwasher
(see enclosed installation instructions)
Free-Standing Appliances
1 • can be set up as stand-alone without additional installation.
If the dishwasher is set up next to a gas or coal cooker, a heat-insu-
lating, non-flammable plate must be mounted between the dish-
washer and the cooker, flush to the top edge of the work surface
(depth
57.5 cm). The plate should have aluminium foil on the side facing the
cooker.
Width
587mm
591 – 594 mm
Thick-
ness:
16 – 24 mm
Height:
(variable) dependent on – Aperture height
– Plinth height
– The adjustment so that the unit matches the height of
the adjoining units
The exact height of the adjoining units must be meas-
ured at the place of installation.
Weight: max. 8 kg