Epson 460 - Manual (Page 52)

46
R4C260
short.bk
Rev_C
A5 size TRBLE.FM
12/15/99 Pass 2
L Proof Sign-off:
M.Hida, CRE Tsukada_______
N. Nomoto
_______
_______
Color gaps
❏ Make sure your paper is not damaged, dirty, or too old.
❏ Run the Head Cleaning utility to clear any clogged ink
nozzles.
❏ Check the B
black and A color ink out lights. If a light is
flashing, replace the ink cartridge. See “ Replacing Ink
Cartridges” on page 31.
Blurry or smeared printout
Try one or more of these solutions.
❏ Make sure the printable side of the paper is face up in the sheet
feeder.
❏ Make sure your paper is not damaged, dirty, or too old.
❏ Set the adjust lever to the “ +” position, and make sure the
Media Type setting is set correctly in your printer driver.
Paper feed or paper jam problems
If the printer doesn’t feed paper, feeds multiple pages, or the
paper is jammed, remove and reload the stack of paper, then press
the
E load/eject button. Also check the following:
❏ The paper isn’t old or creased.
❏ Paper isn’t loaded above the arrow on the left edge guide.
❏ The edge guides are set correctly.
❏ The paper isn’t too thin or rough. Use paper that meets the
paper requirements for this printer. See the online Reference
Guide
for paper specifications.