Electrolux 241957000 - Manual (Page 5)

5 Installation
Installing the Wine Cooler
Your Electrolux wine cooler has been designed for either free-standing or built-in installation. When built-
in, your wine cooler does not require additional air space for top, sides or rear. In either case, the front
grille must
NOT be obstructed.
NOTE
To ease unit installation and removal, it is recommended that the cabinet rough opening dimensions be
increased by at least ¼ inch over the dimensions given for your unit.
Width Height Depth
23 13 /
16
inch 34-35 inches 25 7 /
8
inch
ICON Designer Unit Dimensions
NOTE
All units require zero clearance when installed flush with a cabinet or wall. Electrolux ICON Designer
stainless steel models require a minimum 2 1 /
16
inch handle clearance when installed against a wall or
cabinet that extends beyond the front edge of the unit.
ICON Designer Product Dimensions