Whirlpool 24 Inch Single Electric Smart Wall Oven Owners Guide - Manual (Page 7)

7
3. SET START / END TIME DELAY
You can delay cooking before starting a function: The function will
start or end at the time you select in advance.
■ Tap “DELAY” to set the start time or end time you require.
■ Once you have set the required delay, tap “START DELAY” to
start the waiting time.
■ Place the food in the oven and close the door: The function
will start automatically after the period of time that has been
calculated.
Programming a delayed cooking start time will disable the oven
preheating phase: The oven will reach the required temperature
gradually, meaning that cooking times will be slightly longer than
those listed in the cooking table.
■ To activate the function immediately and cancel the
programmed delay time, tap .
4. START THE FUNCTION
■ Once you have configured the settings, tap “START” to
activate the function.
You can change the values that have been set at any time during
cooking by tapping the value you want to amend.
If the oven is hot and the function requires a specific maximum
temperature, a message will be shown on the display.
■ Press to stop the active function at any time.
5. PREHEATING
If previously activated, once the function has been started the
display indicates the status of preheating phase.
If you did not enter the cooking time in the previous steps, you
can always press on the "SET COOK TIME" icon and enter the
desired time. Tap on "NEXT" to confirm.
Once this phase has been finished, an audible signal will sound
and the display will indicate that the oven has reached the set
temperature.
■ Open the door.
■ Place the food in the oven.
■ Close the door and tap “DONE” to start cooking.
Placing the food in the oven before preheating has finished may
have an adverse effect on the final cooking result.
Opening the door during the preheating phase will pause it.
The cooking time does not include a preheating phase.
6. END OF COOKING
An audible signal will sound and the display will indicate that
cooking is complete.
With some functions, once cooking has finished you can give
your dish extra browning, extend the cooking time or save the
function as a favorite.
■ Tap to save it as a favorite.
■ Select “Extra Browning” to start a five-minute browning cycle.
■ Tap to save prolong the cooking.
COOKING
INSTRUCTION:
For cooking different foods that
require the same cooking
temperature on several shelves
(maximum three) at the same
time. This function can be used DELAY
Convect Bake
START
01:16 since Started
Convect Bake
PREHEATING
350 °F
SET
COOK
TIME
320 °F
Preheat Complete
Insert the food now
DONE
00:01 since ready
Extra Browning
Convect Bake
Cooking
DONE
TIMER
COMPLETE