Echo HCA-2400 - Manual (Page 22)

22
SHC-1700, 2100
B
C
D
B
C
D
SHC-2400
HCA-2400
2. Primer - Pump Bulb.
Pump primer bulb until fuel is visible in the "Clear" fuel return line.
3A. Starting - (SCH-1700, 2100, 2400)
Lay trimmer on a flat, clear area and pull starter handle/rope (D)
until engine fires.
3B. Starting (HCA-2400)
Lay the hedge clipper on a flat, clear area. With left hand, firmly
grasp and hold the "Ignition/Idle Interlock" lever and throttle
trigger in wide open position. Rapidly pull starter handle/rope (D)
until engine fires.
NOTE
HCA-2400 "Ignition/Idle Interlock" must be held tight against the
grip or the engine will stop at idle.
STOPPING ENGINE ( SHC UNITS )
1. Release Throttle. Allow engine to idle down and blades stop
moving with throttle trigger disengaged.
2. Stop Switch - STOP. Move ignition switch button backward to
STOP position.
WARNING DANGER
If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your ECHO dealer repair stop switch before using hedge
clipper again or serious personal injury may result.