Elation Professional Power Wash 250B - Manual (Page 21)

Power Wash 250™
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 21
3.10.2 Lamp On automatically (LAAU)
LAAU
This function automatically strikes lamp when main power is turned on. If
you would prefer to strike the lamp through a DMX controller you must turn
this function off. To toggle between
Off and ON use the Up and Down
buttons. Use the Enter button to confirm your setting.
Please note: ON is the default setting for this function
3.10.3 Lamp Off via DMX (DLOF)
DLOF
This function allows the lamp to be switched off through a DMX controller.
To enable this function use the Up and Down buttons to toggle between
ON
and Off . Turn this function on to allow DMX switching. Press Enter to
confirm or Mode to cancel and return to the menu.
3.10.4 DMX Readout (DMXI)
DMXI
This function will use the LED to readout the DMX values of each channel
received by the fixture. Use the Up and Down buttons to select desired
channel and press Enter to read its value.
Function Value Remark
PAN 0 - 255 Pan Position
TILT 0 - 255 Tilt Position
COLO 0 - 255 Color wheel (fixed colors)
SHUT 0 - 255 Shutter / Strobe function
DIMR 0 - 255 Dimmer
MOVE 0 - 255 Movements
SPEC 0 - 255 Lamp Off, Reset, ...
3.10.5 Display (DISP)
DISP
Use this function to choose between different display indications. Use the
Up and Down buttons to toggle between the two different display modes.