Extron electronic MTPX Plus Series - Manual

Specifications — MTPX Plus Series
1 Extron MTPX Plus Series Twisted Pair Matrix Switchers • Specifications
Video
Routing
MTPX Plus 816 8 x 16 matrix, 3 x 1 local
MTPX Plus 168 16 x 8 matrix, 3 x 1 local
MTPX Plus 1616 16 x 16 matrix, 3 x 1 local
MTPX Plus 1632 16 x 32 matrix, 6 x 2 local
MTPX Plus 3216 32 x 16 matrix, 6 x 2 local
MTPX Plus 3232 32 x 32 matrix, 6 x 2 local
Gain Unity
Crosstalk
816, 168, 1616 models -80 dB @ 1 MHz, -71 dB @ 5 MHz, -55 dB @ 10 MHz, -45 dB @ 30 MHz,
-37 dB @ 100 MHz
1632, 3216, 3232 models -90 dB @ 1 MHz, -76 @ 5 MHz, -72 dB @ 10 MHz, -60 dB @ 30 MHz,
-50 dB @ 100 MHz
Switching speed 200 ms (max )
Video input— local
Number/signal type 3 or 6 analog RGBHV, RGBS, RGsB, RsGsBs, component video (bi-level and
tri-level), S-video, composite video
Connectors 3 or 6 female 15-pin HD
Nominal level 0 7 Vp-p for RGB
Minimum/maximum levels 0 3 V to 1 45 Vp-p with no offset at unity gain
Impedance 75 ohms
Horizontal frequency 15 kHz to 130 kHz
Vertical frequency 30 Hz to 150 Hz
Return loss <-30 dB @ 5 MHz
DC offset (max allowable) 250 mV
Video input — main (see transmitters' output specifications)
Number/signal type 8, 16, or 32 proprietary analog signals
Connectors 8, 16, or 32 (depending on configuration) female RJ-45 connectors
Video output— local
Number/signal type 1 or 2 analog RGBHV, RGBS, RGsB, RsGsBs, component video (bi-level and
tri-level sync),
S-video, composite video
Connectors 1 or 2 female 15-pin HD
Nominal level 0 7 Vp-p for RGB
Impedance 75 ohms
Return loss <-30 dB @ 5 MHz
DC offset <±20 mV with input at 0 offset
Video output — main (see receivers' input specifications)
Number/signal type 8, 16, or 32 proprietary analog signals
Connectors 8, 16, or 32 (depending on configuration) female RJ-45 connectors
Sync— local inputs and outputs only
Input type RGBHV, RGBS, RGsB, RsGsBs
Output type See receiver specifications (see specifications on Web site)
Input level 3 5 V to 5 5 Vp-p, unterminated; 4 0 V to 5 0 Vp-p normal
Output level See receiver specifications (see specifications on Web site)
Input impedance 573 ohms ± 5%
Output impedance 110 ohms