Eton FR600 - Manual (Page 17)

SOLARLINKFR600 OWNER’S MANUAL
17
SOLARLINKFR600 OWNER’S MANUAL
Your radio can be set for one (SINGL) to 23 (MULTI) codes, or can be
set to receive ALL coded information sent from any transmitter, if
your within range. When you set codes, it will only pick up alerts
when you’re in that county or within reception distance of the signal.
To set codes:
1) Revolve the to the “OFF” position.
2) Press the
4) Press shortly once to enter the county code setting mode (MULTI, SINGL or ALL), which blinks in the display. 5) If you don’t know your county code, select ALL with or and press and then
mode (MULTI, SINGL or ALL), which blinks in the display.
5) If you don’t know your county code, select ALL with or and
press
6) Press  or  shortly to select MULTI or SINGL and press
. 7) Press shortly again to enter the code. CODE 01
7) Press
XXXXXX appears in the display, with 01 flashing.
8) Press again and the first digit of six starts flashing. Press or  to set the first digit and then press to go to the
second digit, doing this again and again until all six digits are
entered. 9) If you’re in SINGL, press and then
Press or  to set the first digit and then press to go to the
second digit, doing this again and again until all six digits are
entered.
9) If you’re in SINGL, press
If in MULTI, go to the next step.
10) If you’re in MULTI and wish to enter more codes, press
. 11) 01 flashes. Press or  to go to another code setting number (1-23 flashes) and press .
11) 01 flashes. Press or  to go to another code setting number
(1-23 flashes) and press