How to maintain – Eureka 410 SERIES User Manual

Page 9

Text mode
Original mode

HOW TO MAINTAIN

(continued)

NOTE: Turn off the switch and unplug the electrical cord before servicing the

cleaner. Never operate the vacuum cleaner without the dust cup or filter.

How to Empty Dust Cup

FOR INSTRUCTIONS ON HOW TO REMOVE THE DUST CUP FROM THE
CLEANER BODY, REFER TO PAGE 8.

Emptying the Dust Cup:

It is clearly visible when the dust cup is full and needs emptying. Remove dust cup
from cleaner body. Remove dust cup lid from dust cup by grasping lid handles and
lifting up. (See below.) Then dump debris in a waste container.

Reinstalling the Dust Cup:

Grasp the dust cup lid by the lid handles and sit back on top of dust cup. It will fit only
one way. To replace the dust cup, put bottom of dust cup in place by aligning tabs in
slots and pivoting dust cup up against the cleaner body. Lift up on dust cup latch to
secure in place (a).