Eureka 410 SERIES - Manual (Page 5)

5
HOW TO USE
HOW TO ASSEMBLE
3 Position
ON/OFF
Switch
1
To assemble the cleaner, find the powerhead (a)
and the body (b). Align the connector on the
powerhead with the receptacle on the body and
press together until they click into place.
a
b
Locked Brush
Roll Indicator
2
Power Switch
Top position is Off. Middle position is for floor cleaning and
cleaning with accessories (brush roll does not turn). Bottom
position is for cleaning carpets (brush roll turns).
1
2
Locked Brush Roll Indicator
The brush roll indicator will illuminate brightly when the
brush roll motor has been locked up due to debris or some
other excessive loading of the brush roll. Slide the power
switch to the off position and check the brush roll area for
obstructions. After clearing the brush roll area, start the
vacuum and the brush roll will turn again.
CAUTION: Pulleys can be hot from normal use, to
avoid burns do not touch pulleys.