beautypg.com

Problem solving, Problem cause solution – Eureka WHIRLWIND 6980 User Manual

Page 12

background image

12

Motor will not start.

Electric Plug

Push plug securely into outlet.

Try another outlet.

Check circuit breaker.

Motor suddenly stops.

Thermal Cut Off

Refer to page 4.

Does not clean the carpet

Filters

Clean or replace the filter(s). Hint: If picking up

or floor.

fine dust, the filter may not look dirty but a fine
substance tends to reduce suction when it blocks
the airflow through the filter(s).

Dust Compartment

Be sure hose connection is inserted properly into
dust compartment.

Be sure the dust compartment is properly seated
into the cleaner body. See page 9.

Empty dust compartment.

Belt

Replace a cut, loose or out of shape belt.

Brush Roll

Clean hair and thread from bristles and end cap
area. Replace brush roll if bristles are worn.

Hose

Remove any clogs from the hose that restrict the
airflow.

No suction at the end of

Filter(s)

Clean or replace the filter(s). Hint: If picking up

the hose.

fine dust, the filter may not look dirty, but a fine
substance tends to reduce suction when it blocks
the airflow through the filter(s).

Hose

Remove any clogs from the hose that restrict the
airflow.

Headlight not working.

Light Bulb

Replace light bulb.

Noise from the brush roll

Brush Roll

Remove powerhead hood and clean debris or

area.

items from the brush roll area.

Belt

Replace a cut, loose or out of shape belt.

Cleaner is hard to push.

Belt

Replace a cut, loose or out of shape belt.

PROBLEM SOLVING

NOTE: Turn off the switch and unplug the electrical cord before servicing.

PROBLEM

CAUSE

SOLUTION

3

3

3

3

3

3

3

3

3

3

3

3

3