Eureka WHIRLWIND 6980 - Manual (Page 10)

HOW TO MAINTAIN
(continued)
Changing Filter 2, when the Filter 2 Light Comes On
Open filter cover and remove dirty filter unit.
Place the new filter into the cleaner and close
the cover. The original filtering performance
is now restored.
10
Brush Roll
The brush roll turns to sweep and comb the carpet nap. Keep the brush roll free from hair and threads so it will continue
cleaning. When the bristles of the brush roll no longer touch a piece of cardboard held across the bottom plate, the brush
roll is ineffective because the bristles no longer touch the carpet nap. To maintain the most effective cleaning, install a new
brush roll.
Brush Roll Belt
The brush roll belt on the motorized nozzle drives the brush roll to agitate, sweep, and comb the carpet nap. The belt should
be checked regularly to be sure that it is in good condition. Replace the belt if it is stretching, cracking, or slipping. Cut away
any hair or thread wound around the brush roll or belt pulley because the buildup could cause the belt to rotate unevenly.
Filter 2
Indicator
Light