Elmo HV-7000SX - Manual (Page 24)

23
Front operation panel
Wireless remote control
The Presenter features a one-push auto focus function. Once
focusing is completed, the auto focus function is released, and
the focused position maintains unchanged. (FOCUSFREE)
To obtain sharper image, zoom in on the object in the auto-
focus mode while pressing the zoom button [TELE] on the
front operation panel or wireless remote control.
However, the objects listed below may not be brought into
focus in the auto focus mode. In these cases, use the manual
focus mode.
· Objects bearing little contrast
· Objects with fine repeated patterns, such as lateral stripes
and cross stripes
· Objects glittering or reflecting strong light
· Objects with bright background, or excessive contrast
· Objects in a dark picture plane
· Objects located near and far away at the same time
· Objects in motion
Front operation panel
Wireless remote control
If the focus button [NEAR] or [FAR] on the front operation
panel or wireless remote control is pressed during the auto
focus, the auto focus will be released.
Notes: · The auto focus functions up to approx. 10cm
above the stage surface.
· If the camera head gets heavy shock by
accident, there is a possibility of out of focus. In
such a case, once turn the power OFF and then
re-set to ON.
· It may take some time to bring the camera into
focus in the auto focus mode.
Roughly bring the camera into focus manually
and then press the auto focus button [AF].
Front operation panel
Wireless remote control
Powered Manual Focus
To focus on any part of the material, such as 3-D material,
press the focus button [NEAR] or [FAR] on the front
operation panel or wireless remote control.
Note: The manual focus works up to approx. 10cm above
the stage surface.