Connection to the monitor and the projector – Elmo HV-7000SX User Manual
Page 14
13
Connection to the monitor and the projector
Note: Be sure to turn OFF the power supply to all equipment before making any connections to protect the Presenter
and all the connected equipment.
Note: Hold the cable plug part when connecting or disconnecting the cables.
Connection to the composite video-in terminal
Use the supplied RCA video/audio cable.
Connection to the S-video-in terminal
Connect the S-video-out terminal (mini DIN 4P) of the Presenter to the S-video-in terminal of the monitor.
For the S-video mode, use the supplied 4P mini DIN cable or an S-video connection cable available on the market.
If the equipment to be used is provided with a Y/C separate connector, a conversion adapter is necessary.
Connection to the RGB-in terminal
Connect the RGB output terminal of the Presenter to the RGB input terminal of the equipment with the supplied
RGB cable or a RGB connection cable available on the market.
If the display image shifts from the center, manually adjust the horizontal/vertical positions through the connected
equipment.
If vertical stripes appear on the screen with the use of video projector, it may be improved by manually adjusting the
dot-clock frequency of the projector.
Note:
The resolution of the Presenter can be selected according to the resolution of the equipment to be
connected.
Reference Page
• Resolution selection
P.21
Monitor
OUTPUT
MOUSE CONTROL
AC IN
INPUT
RS-232C
OUTPUT
12V 0.9A
USB
RGB OUT
S-VIDEO
R
L
AUDIO
VIDEO
RGB1
RGB2
AUDIO(L/R)1
AUDIO(L/R)2
Monitor
OUTPUT
MOUSE CONTROL
AC IN
INPUT
RS-232C
OUTPUT
12V 0.9A
USB
RGB OUT
S-VIDEO
R
L
AUDIO
VIDEO
RGB1
RGB2
AUDIO(L/R)1
AUDIO(L/R)2
OUTPUT
MOUSE CONTROL
AC IN
INPUT
RS-232C
OUTPUT
12V 0.9A
USB
RGB OUT
S-VIDEO
R
L
AUDIO
VIDEO
RGB1
RGB2
AUDIO(L/R)1
AUDIO(L/R)2
Monitor
Projector