Epson 24-Pin Dot Matrix Printer LQ-580 - Manual (Page 2)

2
Loading Continuous Paper Onto the Push Tractor
Turn off the printer, then open the
paper guide cover and remove the
paper guide. Open both sprocket covers, and fit the
first three holes of the paper, printable
side down, over the tractor pins. Then
close the sprocket covers.
Note:
Load continuous paper that has a clean, straight
edge to avoid paper jams.
1
paper guide
paper guide cover
2
Q
To feed continuous paper to the standby
position where you can remove it easily,
press the Load/Eject button.
Q
When you load continuous paper of a
different size or thickness, adjust the
position of the sprockets or change the
paper thickness lever setting. See
Chapter 2 of the User’s Guide for
instructions.
To load continuous paper onto the rear push tractor, follow these steps: