Ericsson Advanced Modular Receiver RX8200 - Manual (Page 25)

Web Browser Control
web page. When you switch between tabs, the browser remembers the path for
each tab.
• Navigation Path – The web pages are organized into a tree-like structure, like
the directory on a computer. The current complete navigation path is always
displayed at the top of the web page, which shows the route taken to the
currently displayed web page. To return to a higher level (parent) web page
(folder), simply click on the relevant name link in the Navigation Path or click or
the Top Level Folder in the toolbar.
• Toolbar – The toolbar provides various tools/buttons, depending on the web
page selected. Various icons, buttons and symbols can appear in the Toolbar,
depending on the web page displayed.
• Main Web Page – The main content of the web page (or folder) displays the
parameters and their current values. Some parameters will be modifiable by
overtyping, by selecting an option from a drop-down menu or by placing a tick in
a checkbox, as required. Any changes made will not be applied to the unit until
the Apply Changes button is clicked in the Toolbar.
• Results Frame – The result frame at the bottom of the screen shows the results
of command actions. SUCCESS, SUCCESS with warnings or ERROR may be
displayed, with further details as appropriate for more complex actions.
The following table lists the various icons, buttons and other symbols used in these
web pages.
5.2.2 Viewing the Web Pages
The user settings that may be viewed, or modified from the Web Browser interface,
are grouped together by function and are displayed on a number of pages. These
pages can be viewed by selecting the relevant tabs.
After any changes are made to user settings, the ‘Apply Changes’ button must be
pressed to action the changes.
To use the receiver Web Browser Interface: enter the IP address (which was
assigned to the receiver control port in the front panel system menu) into the
address field of the Web browser.
If the network is correctly configured, the Status page should be automatically
loaded and displayed.
EN/LZT 790 0009 R1A 2011-03-30 25 (44)