EverFocus EHA-SRX - Manual (Page 2)

EHA-SRX
Please read this manual first for correct installation and operation. This manual should be
retained for future reference. The information in this manual was current when published. The
manufacturer reserves the right to revise and improve its products. All specifications are
therefore subject to change without notice.
PRECAUTIONS
1. Do not install the EHA-SRX near electric or magnetic fields.
Install the EHA-SRX away from TV/radio transmitters, magnets, electric motors,
transformers and audio speakers since the electromagnetic fields generated from these
devices may distort the video image.
2. Never disassemble the EHA-SRX beyond the recommendations in this manual nor
introduce materials other than those recommended herein.
Improper disassembly or introduction of corrosive materials may result in equipment
failure or other damage.
3. Keep the power cord away from water and other liquids and never touch the power
cord with wet hands.
Touching a wet power cord with hands or touching the power cord with wet hands may
result in electric shock.
4. Never install the EHA-SRX in areas exposed to water, oil or gas.
Water, oil or gas may result in equipment failure, electric shock or, in extreme cases, fire.
5. Do not operate the camera beyond the specified temperature, humidity or power
source ratings.
Use the camera at temperatures within 0℃ ~ 50℃ (32℉~122℉) and humidity between
20~80%. The input power source is 12VDC.
2