Electrolux LAVAMAT TURBO L 12720 VIT - Manual (Page 28)

At the end of the programme
The machine stops automatically. A blinking zero appears on the display.
The END
light comes on in the programme progress display, the
START/PAUSE light is off.
Turn the selector dial to RESET (H).
If the RINSE HOLD
option has been selected the END and the
RINSE HOLD lights remain lit, the door is blocked, to indicate that the
water must be emptied out before opening the door either
To empty out water:
• select the DRAIN (D) programme to empty out the water without
spinning.
• select the SPIN (F) programme for spinning.
• select the SPIN SPEED and depress the START/PAUSE button;
Warning! The programme selector dial must be turned first to RESET
and then to the DRAIN or SPIN programmes.
At the end of the programme the selector dial must be turned to position
RESET and the machine must be switched off by pressing the ON/OFF
but-
ton.
Remove the laundry from the drum.
Check that the drum is empty so as to avoid any forgotten items
being damaged in a subsequent wash (e.g. shrinking) or their colour
running into a load of whites.
Close the water tap.
Leave the door open to prevent the formation of mildew and unpleas-
ant smells.
How to dry
Drying only
Warning! Do not exceed the maximum laundry loads:
- 2.5 kg for linen and cottons
- 1.5 kg for synthetics.
The water tap must be open and the drain hose must be positioned in
the sink or connected to the drain pipe.
28
How to wash
132984560.qxd 07/10/2005 19:07 Pagina 28