Edimax Technology EW-7206PDg - Manual (Page 13)

Wireless LAN Access Point Configuration
3.2 Configuring the Access Point
Every time when you have finished modifying a setting page and click “Apply”
button, this page will pop-up. The settings have been successfully saved but
will not take effect immediately. You have to restart the access point to make
the new settings take effect. You can click “CONTINUE” button to continue
other settings. You also can click “APPLY” to restart the system and make the
settings take effect.
3.2.1 Status and Information
On this screen, you can see the general information of the Access Point
including Alias Name, Firmware Version, ESSID, Channel Number, Status, IP
Address, MAC Address, etc.
11