Evo Fitness EVO1 - Manual (Page 10)

EVO1 MOTORIZED TREADMILL
Visit us at: www.evofitness.com
10
ASSEMBLY
STEP 1:
Remove your treadmill from the carton and place it on the floor in an open area as shown in FIG-1.
First, remove the 6 x 13mm Washers (34) and M6 x 55mm Bolts (33) from the Base Frame (43), they have been pre-
assembled by the factory. Then make sure to connect the wires from the Left Upright (26) to the Base Frame (43).
Next
insert the Left and Right Uprights (26 and 27) into the Base Frame (43) and secure with two M6 x 55mm Bolts (33), 6 x
13mm Washers (34) and four
M8 x 15mm Allen Head Bolts (35).
35
35
27
26
FIG-1
33 34
34 33
43
CONNECT
WIRES