Eton Solarlink ARCFR600R User Manual
Page 17
17
SOLARLINK
FR600
OWNER’S MANUAL
3) Press or shortly to select the “COUNTY CODE” option.
4) Press
shortly once to enter the county code
setting mode (MULTI, SINGL or ALL), which blinks in the
display.
5) If you don’t know your county code, select ALL with or
and press
and then TO EXIT. If you
know your code, don’t press SELECT and go to the next
section.
6) Press or shortly to select MULTI or SINGL and press
.
7) Press
shortly again to enter the code. CODE 01
XXXXXX appears in the display, with 01 flashing.
8) Press
again and the first digit of six starts
flashing. Press or to set the first digit and then press
to go to the second digit, doing this again and again until
all six digits are entered.
9) If you’re in SINGL, press
and then to
exit. If in MULTI, go to the next step.
10) If you’re in MULTI and wish to enter more codes, press
.
11) 01 flashes. Press or to go to another code setting
number (1-23 flashes) and press
.
12) The first digit of six flashes, use or to set it and press
to enter the next number, doing this again and again
until all six digits are entered.
13) Press
to choose another code number (1-23)
and when your finished press
and then MENU
to exit.