Electrolux 70170 TK - Manual (Page 21)

What to do if ...
21
Symptom Possible Cause Remedy
Unusual noises.
Appliance is not level.
The appliance is touching
the wall or other objects.
Readjust the feet.
Move the appliance
slightly.
The compressor does not
start immediately
after
pressing the COOLMATIC
button, or
after changing
the temperature setting.
This is normal, no error has
occurred. The compressor starts after
a period of time.
Water on the floor or on
storage shelves. Water drain hole is
blocked. See the “Cleaning and
Care” section.
Changing the light bulb
Warning! There is a risk of electric shocks! Before changing the light
bulb, switch off the appliance and unplug it, or disconnect from the
mains supply.
Light bulb data: 220-240 V, max. 15 W
☞
1. To switch off, press the ON/OFF button until the mains power light
extinguishes.
2. Unplug the mains plug.
3. To change the light bulb, undo the
screw.
4. Press the light bulb cover as shown and
slide it backwards.
5. Change the defective light bulb.
6. Refit the light bulb cover and the screw.
7. Put the refrigerator back into operation.