Emerson EWR10D4 - Manual (Page 38)

38
Settings for an external source (cont’d)
Recording
Before recording from an external source, see the instructions for the connection on page 37.
DVD-RW DVD-RW
VR
DVD-RW DVD-RW
Video
DVD-R DVD-R
Recording from an external source
1. Turn the TV and the DVD recorder on, and be sure to select
the input of the TV to which the DVD recorder is connected.
2. Press OPEN/CLOSE A button to open the disc tray, then
place the disc to record properly.
3. Select the input of the DVD recorder which the external
equipment is connected. (L2 or L1)
• To use the input jacks on the back of this unit, select “L1” position by
pressing [0], [0], [1] on the remote control or the CH L / K buttons.
• To use the input jacks on the front of this unit, select “L2” position by
pressing [0], [0], [2] on the remote control or the CH L / K buttons.
4. Select a recording speed using REC SPEED button. Refer to
“Recording speed” on page 26.
5. Press REC button on the DVD recorder to start recording.
6. Press Play button on the external source to record from.
7. Press STOP C button on the DVD recorder to stop record-
ing.
This operation may take a while to be completed.
XP SP LP
EP SLP SEP
This operation may take a while to be recognized.
POWER
DISPLAY
REC SPEED CLEAR CM SKIP
SKIP REC PAUSE
SETUP
REPEAT
ZOOM
ENTER
RETURN
REC
MONITOR
OPEN/CLOSE
TIMER
PROG.
MENU/LIST TOP MENU
SPACE
1 2 3
4 5 6
7 8 9
0
F
A
{ B
FWD
g
STOP
C
PLAY
B
REV
h
H G
CH
.@/: ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
K
L
5
4
1 2
7
3