Exmark Lazer Z Advantage Series X - Manual (Page 17)

Specifications
– 48 inch Deck: 16.25 inches (41.3 cm)
– 52 inch Deck: 18.00 inches (45.7 cm)
– 60 inch Deck: 20.50 inches (52.1 cm)
– 72 inch Deck: 24.50 inches (62.2 cm)
• Blade Spindles: Solid steel spindles with 1.00 inch
(25 mm) I.D. bearings.
• Deck Drive:
Electric clutch:
– 48 and 52 inch Decks: “B” Section belt with
self-tensioning idler.
– 60 and 72 inch Decks: 5V Section belt with
self-tensioning idler.
• Deck:
Full floating deck is attached to out-front support
frame. Anti-scalp rollers provide maximum turf
protection. Deck design allows for bagging,
mulching or side discharge.
– 48 inch Deck: 3 anti-scalp rollers
– 52 inch Deck: 3 anti-scalp rollers
– 60 inch Deck: 4 anti-scalp rollers
– 72 inch Deck: 4 anti-scalp rollers
• Deck Depth:
– 48 inch Deck: 5.5 inches (14 cm)
– 52 inch Deck: 5.5 inches (14 cm)
– 60 inch Deck: 5.5 inches (14 cm)
– 72 inch Deck: 5.5 inches (14 cm)
• Cutting Height Adjustment:
Foot activated lever is used to adjust the cutting
height from 1 inch (2.5 cm) to 5 1/2 inches (14
cm) in 1/4 inch (6.4 mm) increments.
• Mulching Kit: Optional.
Dimensions
Overall Width:
48 inch Deck 52 inch Deck
Without Deck 45.7 inches
(116.1 cm) 45.7 inches
(116.1 cm)
Deflector Up 51.8 inches
(131.6 cm) 56.3 inches
(143.0 cm)
Deflector Down 59.6 inches
(151.4 cm) 64.8 inches
(164.6 cm)
60 inch Deck 72 inch Deck
Without Deck 53.0 inches
(134.6 cm) 59.1 inches
(150.1 cm)
Deflector Up 62.5 inches
(158.8 cm) 73.5 inches
(186.7 cm)
Deflector Down 72.8 inches
(184.9 cm) 84.9 inches
(215.6 cm)
Overall Length:
48 inch Deck 52 inch Deck
Roll Bar - Up 79.2 inches
(201.2 cm) 79.2 inches
(201.2 cm)
Roll Bar - Down 80.9 inches
(205.5 cm) 80.9 inches
(205.5 cm)
60 inch Deck 72 inch Deck
Roll Bar - Up 83.1 inches
(211.1 cm) 86.1 inches
(218.7 cm)
Roll Bar - Down 84.8 inches
(215.4 cm) 87.8 inches
(223.0 cm)
Overall Height:
Roll Bar - Up Roll Bar - Down
70.5 inches (179.1 cm) 46.8 inches (118.9 cm)
17