For cottons: 1600 rpm, For jeans programme: 1200 rpm, Wool and handwash: 1000 rpm – Electrolux EWN 16781 W User Manual

Page 11: For synthetics, shirt and lingerie: 900 rpm

use electrolux 11

Attention!

If you turn the programme selector dial
to another programme when the
machine is working, the red
Start/Pause pilot light will flash 3 times
and the message Err will appear on the
display to indicate a wrong selection.
The machine will not perform the new
selected programme.

Programme Option buttons

Depending on the programme, different
functions can be combined. These must
be selected after choosing the desired
programme and before depressing the
Start/Pause button.

Select the temperature

Press this button repeatedly to increase or
decrease the temperature, if you want
your laundry to be washed at a
temperature different from the one
proposed by the washing machine.

Maximum temperatures are 90°C for
Cottons, 60°C for Cotton Eco and
Synthetics, 40°C for Synthetics Eco,
Delicates, Lingerie, Duvet, Curtains
and Jeans programmes, Wool and
fabrics to be handwashed, 30°C for
Quick Wash, Silk, Shirt and while
corresponds to cold wash.

During the washing cycle the
thermometer is animated.

Temp.

Spin

Easy Iron

Delay

Rinse

Time

Manager

Extra

Start/

Pause

Select the spin speed, No spin,
Rinse Hold or Night Cycle option

Press the Spin button repeatedly to
change the spin speed, if you want your
laundry to be spun at a speed different
from the one proposed by the washing
machine.

During the spinning phase the spiral is
animated.

Maximum speeds are:

●

for Cottons: 1600 rpm;

●

for Jeans programme: 1200 rpm;

●

Wool and Handwash: 1000 rpm

●

for Synthetics, Shirt and Lingerie:
900 rpm;

●

for delicate fabrics, Silk, Quick Wash,
Duvet and Curtains: 700 rpm.

No spin

option eliminates all the

spin phases (in some programmes
increases also the number of rinses).

Rinse Hold

: by selecting this

option the water of the last rinse is not
emptied out to prevent the fabrics from
creasing.

When the programme has finished the
display shows a

0.00

flashing, the

(Door) icon is still visualized, the
Start/Pause light is off and the door is
locked to indicate that the water must
be emptied out.