Eagle Electronics Accura 240 - Manual (Page 18)

16
When the Accura 240 is turned on, FishTrack is enabled. To turn the
FishTrack feature off, press the menu key, then press the up or down arrow
keys until the FISH ID menu appears. Now press the left arrow key.
Pressing it once switches the FishTrack feature off, but leaves Fish ID on.
To turn FishTrack on, press the right arrow key, which highlights the
"TRACK" label on the Fish ID menu.
CHART SETUP
The Accura 240 lets you customize the
chart screen. To do this, press the MENU
key, then press the up or down arrow keys
until the "CHART SETUP" menu appears.
Now press the right arrow key. The screen
shown at right appears.
The digital depth display at the top left
corner of the screen normally shows in
large numbers. You can change this to
smaller numbers or turn it off completely
using the "Show Digital" menu at the top of
this screen.
You can also turn the temperature, speedometer, distance log, zoom bar,
zone alarm bar,or cursor on or off using this menu. See below for more
information on these items.
CHART CURSOR
The Accura 240 has a chart cursor that allows you to pinpoint a target’s
depth. The cursor is simply a horizontal line that extends across the display
from left to right. A depth box at the end of the line on the right side shows
the line’s depth. In the example at right,
the cursor (line) is at 29.8 feet.
To display the chart cursor, highlight the
"Show Cursor" on the "Chart Setup" menu,
then press the right arrow key. A screen
similar to the one at right appears. Use
the up and down arrow keys to move the
cursor up or down to the desired depth.
To turn the chart cursor off, repeat the
above steps. The Accura 240 returns to
the sonar screen without the chart cur-
sor.