Remote control, Installation and connections – Elta 2402N User Manual

Page 16

16.

Remote control

1. PLAY / PAUSE: Play/pause

2. SKIP -: Previous track / search track backward

3. PROGRAM: Program mode

4. STOP: Stop playback

5. SKIP +: Next track / search track forward

6. REPEAT: Repeat modes

Installation and Connections

Insert batteries into the remote control (not supplied)

1. Remove the battery compartment cover by pressing it

down and sliding it out.

2. Insert 2 AAA batteries type “AAA / UM – 4“, 1.5V into the

battery compartment. Please observe the correct polarity as

marked with “+” and “-” inside the battery compartment.

3. Replace the cover by pushing onto the battery compartment

until it snaps in.

Battery Safety Precautions

• Follow the battery manufacturer’s safety and usage instructions.

• Keep batteries away from children and pets.

• Do not throw batteries into fire. Never expose batteries to heat or fire.

• Disposal of batteries: Dispose exhausted batteries according to the local laws and regulations. For further

information, please contact your disposal authority.

• Do not mix exhausted and new batteries or normal and rechargeable batteries.

• Do not mix different battery types (e.g. alkaline, zinc/carbon, rechargeable batteries). Use only batteries of

the same type and size.

• During longer periods of non-use, please remove the batteries.

• Wrong usage of batteries can cause a leaking of the electrolyte and corrode the battery compartment or let

the batteries burst.

Notes about the remote control:

• If the operation range of the remote control becomes smaller, the batteries are exhausted and must be

replaced.

• Press the keys soft, but firm.

• Direct the remote control unit from no more than about 6 m from the remote control sensor and within an

angle about 60° towards the sensor window on the front of the device.

• Do not direct bright lamps towards the sensor.

• The operation range depends on the brightness of the room.

• Objects between the remote control and sensor window block the transmission.

• Do not use the remote control simultaneously with remote controls of other devices.

Connection of the speakers

Uncoil the speaker wires and connect them to the speaker terminals SPEAKER (L / R) (16).