Setting up your new microwave oven – Samsung 30 Inch Over-the-Range Microwave Installation Guide User Manual
Page 12
12 English
Se
tting up y
our ne
w micr
o
w
av
e o
v
en
Setting up your new microwave oven
The functions, options, and corresponding numeric buttons are listed in the table
below.
No.
Function
Description
Options
1
Display Weight
Weight options are
pounds and kilograms.
1 Lbs.
2 Kg.
2
12 HR/24 HR
The clock can display in
either the 12 HR or 24 HR
time mode.
1 12 HR
2 24 HR
3
Sound
Sound can be turned On
and Off.
1 Sound ON
2 Sound OFF
4
Remind End
Signal
The Remind End Signal
can be turned On and Off.
1 ON
2 OFF
5
Daylight
Savings Time
Adjustment
The time can be advanced
one hour for DST without
resetting the clock.
1 ON (to advance one hour)
2 OFF (to go back one hour)
6
Demo Mode
The Demo Mode can be
turned On and Off.
1 ON
2 OFF
7
Filter Remind
The Filter Remind function
can be turned On and Off.
1 ON
2 OFF
8
Word Scroll
Speed
There are three speeds,
Slow, Normal, and Fast.
The default is Normal
speed.
1 Slow speed
2 Normal speed
3 Fast speed
9
Clock
The clock can be adjusted.
Press the
numeric
buttons
to enter the current time.
(First 2 digits are for
hours, last 2 digits are for
minutes.)
Setting the time
Your microwave oven is equipped with a built-in clock. Set the clock when first
installing your microwave oven and after a power failure. The time is displayed
whenever the microwave oven is not being used.
1
2 4
3 5
1.
Press the
Options
button.
2.
Press the
9
button.
3.
Press the
OK
button.
4.
Use the
numeric
buttons to enter the
current time. You need to press at least
three numbers to set the clock. For
example, if the current time is 5:00,
press 5, 0, 0.
The display will show 5 : 00.
5.
Press the
OK
button.
Using my setting feature
You can customize your new microwave oven to suit your preferences.
To customize:
1
2 4
3 5
1.
Press the
Options
button.
2.
Press one of the
numeric
buttons to
select a function you want to customize.
3.
Press the
OK
button.
4.
Press one of the
numeric
buttons to
select a setting.
5.
Press the
OK
button.