Sharp 1.5 Cu. Ft. Countertop Microwave Oven Installation Guide for Trim Kit - Manual (Page 4)

4 E
For any other assistance or information about this kit,
in USA please call Sharp’s Customer Assistance Center at
1-800-BE-SHARP (1-800-237-4277)
In Canada, call 905-568-7140
SHARP ELECTRONICS CORPORATION
1 Sharp Plaza Suite 1, Mahwah, New Jersey 07495-1123, U.S.A.
SHARP ELECTRONICS OF CANADA LTD.
335 Britannia Road East Mississauga, Ontario L4Z 1W9, Canada
C. CABINET INSTALLATION: Avoid pinching the cord
between the oven and the wall. Adjust the position of the
oven so that the feet of the oven are fitted into the holes
of the Bottom Duct Assembly. See Figure 8.
DUCT RECESS
BOTTOM
DUCT
ASSEMBLY
FOOT
Figure 8
D. BACK FRAME INSTALLATION: Position back frame equal
space top to bottom, side to side. Mark for 4 holes, center
punch and pre-drill with 1/16" drill bit. Secure frame with 4
SCREWS (G). See Figure 9.
EQUAL GAP TOP, BOTTOM
EQUAL GAP
SIDE TO SIDE
MOUNTING HOLES
MOUNTING HOLES
MOUNTING HOLES
MOUNTING HOLES
Figure 9
E. FRONT FRAME INSTALLATION: Place the FRONT FRAME
onto the BACK FRAME and align ball studs and receivers.
Secure the FRONT FRAME to the BACK FRAME by firmly
pushing the front frame onto the back frame engaging the
four (4) snap attachments. See Figure 10.
SNAP
ATTACHMENT
Figure 10