Setting up, Pre-installation checklist – Energy Tech Laboratories 7900CTP User Manual
Page 7
Setting Up |
7
Setting Up
Pre-installation Checklist
You will need the following components:
•
Epson Stylus Pro 7900 printer
•
Plate curing unit (PCU)
•
Plate guide
•
Epson DirectPlate Aluminum sample pack (12 × 18 inches
)
•
EFI
™
eXpress CTP software RIP CD
•
Hexagonal (Allen) (2.5 mm/0.10 inch) wrench
•
Teflon
®
tape for use on plate guide
•
THERMAX
®
temperature strips