Eureka 790 - Manual (Page 10)

Exhaust Filter
10
Look for the symbol.
GENUINE
EUREKA PRODUCT
HOW TO MAINTAIN (continued)
NOTE: Turn off the switch and unplug the electrical cord before servicing the
cleaner. Never operate the vacuum cleaner without the dust cup or filter
in place.
FILTER
2
The filters should be checked at each
empting of dust cup. If the filters are dirty,
clean or replace for maximum performance
of your cleaner.
Dust Cup
The exhaust filter is located behind the
dust filter gr ille below the dust cup
compartment.
Remove the dust cup. (The dust cup has
to be removed first to enable removal of
exhaust grille.) Lift up on exhaust grille
handle to remove. The filter is attached to
the back of the grille. If the exhaust filter is
dirty, remove and clean or replace with a
new filter.
To clean the exhaust filter, brush the debris
off into a trash bin or vacuum with another
vacuum cleaner.
To replace the exhaust filter, tuck the
bottom of the filter behind the two filter
retainers at the bottom of the exhaust grille.
Then place the top of the filter behind the
two filter retainers at the top of the grille.
Press the filter down on narrow pegs in
the center of the grille. Replace the grille
on the cleaner and replace the dust cup.
Lower
Filter
Retainers
Exhaust
Grille
Handle
Upper Filter
Retainers