beautypg.com

Languages supported by the application, Languages supported by the automatic installer, Limitations imposed by a windows vista environment – Epson V4.21 User Manual

Page 7: Before starting operations, The languages listed in s, Languages supported, By the application, Languages, Supported by the automatic installer

background image

6

Operating environment

f

Languages supported by the application

Note that Ukrainian is not supported by Windows Vista.
Arabic is not supported by Windows NT4.0.

f

Languages supported by the automatic installer

Limitations imposed by a Windows Vista
environment

When using EMP Monitor under Windows Vista, note the following
limitations.
• You must have administrator authority in order to use "Register at

startup" on the "Environment setup" screen of EMP monitor.
s

"Monitoring using the system tray"

p.22

• Even after EMP monitor has been uninstalled, the settings and log

information will remain on the hard disk. If this information is no longer
required, you may delete the "EMP Monitor V4.21" folder. Provided the
default settings were used at installation, this folder can be found at:
"C:\Users\(User Name)\AppData\Local\VirtualStore\Program
Files\EPSON Projector\EMP Monitor V4.21"

Before starting operations

Check the following points before starting up EMP Monitor.
• EMP Monitor must be installed on the computer to be used for

monitoring and control.

• The computer and the projectors must be connected to the network.
• If using Windows 2000, NT4.0, XP, or Vista, the computer must be

started up in Administrator mode.

When using EMP-6000/82/62/828/821/81/61
• A commercially-available serial

⇔ TCP/IP conversion adapter and a

connection cable are required in order to use EMP Monitor.
s

"Standby mode" in the projector's User's Guide

• Make the settings for the serial

⇔ TCP/IP conversion adapter before

connecting to the projector.