Echo SRM-400U - Manual (Page 22)

22
• Inspect and adjust every part of the unit.
- Completely clean every part, and repair, if
necessary.
- Apply thin coating of oil on metal parts to
prevent rust.
- Remove the cutter head, apply sufficient oil
coating and wrap up in plastic.
LONG TERM STORAGE
• Drain fuel tank, pull starter handle slowly a few
times to drain fuel from carburetor.
• Pour a small amount of clean motor oil into
spark plug hole, pull starter handle and then
crank the engine until TOP DEAD CENTER.
• Store in a dry area, free from dust.