Echo GT-2000R - Manual (Page 9)

G
RASS
T
RIMMER
O
PERATOR
'
S
M
ANUAL
9
S
PECIFICATIONS
MODEL ----------------------------------------------------- GT-2000R
Length ------------------------------------------------------- 1400 mm (55.1 in.)
Width -------------------------------------------------------- 330 mm (13.0 in.)
Height ------------------------------------------------------- 360 mm (14.2 in.)
Weight (dry) w/Cutter Head ------------------------------ 4.08 kg (9.0 lb.)
Engine Type ------------------------------------------------ Air cooled, two-stroke, single cylinder gasoline engine
Bore ---------------------------------------------------------- 32.2 mm (1.268 in.)
Stroke -------------------------------------------------------- 26.0 mm (1.04 in.)
Displacement ----------------------------------------------- 21.2 cc (1.29 cu. in.)
Exhaust System -------------------------------------------- Spark Arrestor Muffler
Carburetor -------------------------------------------------- Zama diaphragm model C1U w/primer
Ignition System -------------------------------------------- Flywheel magneto, capacitor discharge
Spark Plug -------------------------------------------------- NGK BPMR-7A Gap 0.65 mm (0.026 in.)
Fuel ---------------------------------------------------------- Mixed (Gasoline and Two-stroke Oil)
Fuel/Oil Ratio ----------------------------------------------- 50:1 ECHO High Performance, two-stroke air cooled engine oil
Gasoline ----------------------------------------------------- 89 Octane unleaded. DO NOT use fuel containing methyl alcohol,
more than 10% ethyl alcohol or 15% MTBE.
Oil ------------------------------------------------------------ 50:1 ECHO High Performance, two-stroke air cooled engine oil
Fuel Tank Capacity ---------------------------------------- 0.4 lit. (13.5 US fl. oz.)
Starter System ---------------------------------------------- Automatic Rewind Starter
Clutch ------------------------------------------------------- Centrifugal Type
Drive Shaft -------------------------------------------------- 1/4” Flex Shaft
Rotating Direction ----------------------------------------- Clockwise viewed from top
Cutter Head ------------------------------------------------- Nylon line head (2-line) with .080 Line capacity 203 mm (8 in.)
Handle ------------------------------------------------------- Left - D-Loop, Right - Grip
Shoulder Harness ------------------------------------------ Optional P/N 99944200201
Idle Speed (RPM) ------------------------------------------ 2400 - 3200 RPM
Wide Open Throttle Speed (W.O.T.) with
Nylon Line Head (RPM) ----------------------------------- 6800 - 7500 RPM