beautypg.com

Echo GT-2000R User Manual

Page 20

background image

20

LUBRICATION

Level 1.

Tools Required: 8mm Open End Wrench, Screwdriver, Clean Rag.

Parts Required: ECHO

®

LUBE

TM

8 oz. (P/N 91014) or

Lithium Base Grease.

1.

Remove plastic shield.

2.

Loosen bearing housing locating screw (A), at the top of the
housing, remove mounting screw (B).

3.

Pull the flexible drive shaft (C) from the housing, wipe clean and
recoat with a thin coating [1/2 oz. (15 ml)] of grease.

4.

Slide the flexible drive shaft back in the drive housing being careful
not to get dirt on the flexible drive shaft.

5.

Install the bearing housing and shield.

A

B

C

See also other documents in the category Echo Gardening equipment: