Electrolux LAVATHERM T56830 - Manual (Page 26)

Installation and connection instructions
Installation safety instructions
• Before first starting up, all parts of the transport safety equipment must be
removed. The machine may otherwise be damaged.
• Before starting up for the first time, ensure that the nominal voltage and
type of current specified on the machine type plate match the nominal vol-
tage and type of current at the installation site. The electrical fuses required
can also be found on the type plate.
• Always connect the plug into a protection contact socket which has been
installed as specified.
• With permanent connections: A permanent connection may only be esta-
blished by an authorised specialist electrician.
• Do not install machine in rooms at risk of frost.
• Ensure that the door of the machine cannot be blocked by interior doors of
the house or the doors of other appliances.
• Do not install on carpets with high piles. Air circulation will be hindered at
the ventilation slots.
• Ensure that the machine is not placed on its mains cable.
• Install the machine horizontally.
26
125983990.qxp 2006-04-21 07:12 Page 26