beautypg.com

Cleaning the door seal – Electrolux LAVATHERM T56830 User Manual

Page 18

background image

Clean the entire filter area

The strainer area does not have to be cleaned after every drying cycle,

but should be checked regularly and cleaned of fluff if necessary.

6. To do this, grip the top of the large

mesh filter and pull it forwards
until it comes loose from the two
brackets.

7. Remove fluff from the entire filter

area. It is best to use a vacuum
cleaner for this purpose.

8. Press both journals of the large

mesh filter into the brackets on the
loading door until they snap into
place.

9. Re-insert fine strainer.

10. Press against the large mesh filter

until it locks into the interlock.

If the fine strainer is not fitted,
the large mesh filter will not snap
into place and the loading door
cannot be closed.

Cleaning the door seal

Wipe the door seal with a damp cloth immediately after the drying cycle
has finished.

18

125983990.qxp 2006-04-21 07:12 Page 18