Envision Peripherals LCD - Manual (Page 4)

3
English
Deutsch
Français
Italiano
Español
Nederlands
UNPACKING
Carefully lift the monitor out of the packaging and make sure that all components are
included (see fig. 1). Save the original box and packing material in case you have to ship
or transport the monitor. To set up the device, you must fit the monitor base together.
Monitor 1 pc 1 pc 1 pc
Figure 1 Signal Cable Power Cable User’s Manual
Figure 1.LCD Monitor
CONNECTING
To connect the monitor to your PC
1. Make sure that the PC and the monitor is unplugged.
2. Connect the 15-pin signal cable to the monitor and The PC
To connect the monitor to the power source
Connect the separate power cable to the Monitor and a grounded outlet.