beautypg.com

Bios ep-3vca2 – EPoX Computer EP-3VCA2 User Manual

Page 36

background image

BIOS

EP-3VCA2

Page 4-10

AGP-4X Mode: Chipset AGP Mode support.

Options: x1 , x2 and x4.

USB Keyboard Support: This controls the activation status of an optional USB

keyboard that may be attached. The default is disabled.
Enabled: Enable USB keyboard support.

Disabled: Disable USB keyboard support.

OnChip Sound: Turn on/off onchip sound device.

OnChip Modem: Turn on/off onchip software modem device.

CPU to PCI Write Buffer: When enabled, up to four D words of data can be

written to the PCI bus without interruting the CPU. When disabled, a write buffer

is not used and the CPU read cycle will not be completed until the PCI bus signals
that it is ready to receive the data.

The Choice: Enabled, Disabled.

PCI Dynamic Bursting: When Enabled, data transfers on the PCI bus, where

possible, make use of the high-performance PCI bust protocol, in which graeater

amounts of data are transferred at a single command.
The Choice: Enabled, Disabled.

PCI Master 0 WS Write: When Enabled, writes to the PCI bus are command

with zero wait states.

The Choice: Enabled, Disabled.

PCI Delay Transaction: The chipset has an embedded 32-bit posted write buffer
to support delay transactions cycles. Select Enabled to support compliance with

PCI specification version 2.1.

The Choice: Enabled, Disabled.

PCI #2 Access #1 Retry: This item allows you enabled/disable the PCI #2
Access #1 Retry.

The Choice: Enabled, Disabled.

Memory Parity/ECC Check: If the DRAM chip in your system support Parity/

ECC check, select Enabled.