EPoX Computer EP-3VCA2 - Manual (Page 11)

Features EP-3VCA2
Page 2-1
Section 2
FEATURES
EP-3VCA2 Features:
• EP-3VCA2 is based on the Socket 370 Processors including PPGA & FC-
PGA operating at 300 ~ 800MHz.
• Designed with VIA Apollo Pro 133A PCIset.
• Supports up to 768MB of DRAM (minimum of 8 MB) on board (please
see Section 3-2).
• EP-3VCA2 will support Error Checking and Correcting (ECC) when using
parity SDRAM memory modules. This will detect multiple bit errors and
correct 1-bit memory errors.
• Supports (5) 32 bit PCI slots, (1) 4X AGP slot, (1) AMR slot and provides
(2) independent high performance PCI IDE interfaces capable of supporting
PIO Mode 3/4 and Ultra DMA 33/66 devices. The EP-3VCA2 supports (5)
PCI Bus Master slots and a jumperless PCI INT# control scheme which
reduces configuration confusion when plugging in PCI card(s).
• Supports ATAPI (e.g. CD-ROM) devices on both Primary and Secondary
IDE interfaces.
• Designed with on chip Multi I/O: (1) floppy port, (1) parallel port (EPP,
ECP), and (2) serial ports (16550 Fast UART).
Note: Japanese “Floppy 3 mode” is also supported
• Features Award Plug & Play BIOS. With Flash Memory you can always
upgrade to the current BIOS as they are released. (http://www.epox.com/
please visit our Technical Support section for the latest updates).
• EP-3VCA2 utilizes a Lithium battery which provides environmental
protection and longer battery life.