Electro-Voice Phoenix - Manual (Page 17)

Combining the punch of dual 12-inch DVX 3121, a narrow 45° x 30° horn pattern, and
dual ND2 manifold compression drivers, the PX2122 is designed to be used in medium
to long throw applications with a minimum of two cabinets per side. The bi-amp only
architecture ensures that the PX2122 is used to maximum potential.
The PX2122 shares the same exterior dimensions as the PX2152 for coherent aesthet-
ics. Both cabinets employ rugged EVCOAT covering, and 13-ply plywood using complex
tongue-in-groove construction for strength and consistency. Its integral 15° per side
trapezoidal arrangement allows arraying up to three wide within the grooves routed into
the PX2181 subwoofer.
Combining the punch of dual 12-inch DVX 3121, a narrow 45° x 30° horn pattern, and
dual ND2 manifold compression drivers, the PX2122 is designed to be used in medium
to long throw applications with a minimum of two cabinets per side. The bi-amp only
architecture ensures that the PX2122 is used to maximum potential.
The PX2122 shares the same exterior dimensions as the PX2152 for coherent aesthet-
ics. Both cabinets employ rugged EVCOAT covering, and 13-ply plywood using complex
tongue-in-groove construction for strength and consistency. Its integral 15° per side
trapezoidal arrangement allows arraying up to three wide within the grooves routed into
the PX2181 subwoofer.
The PX1122M and PX1152M are versatile,
full-range, two-way multi-purpose loudspeakers designed for a wide array of applications.
Capable of being used in either bi-amp or passive mode, these powerful systems are out-
standing floor monitors, side fills, small system mains and truss mounted fills.
Both systems utilize precisely summed dual manifold ND2 compression drivers (for maximum mid
and high-frequency horsepower) coupled to a low distortion 90° x 45° horn for optimal coverage.
High-efficiency forced-air cooled DVX woofers provide the punch and bottom end for these power-
ful yet diminutive systems.
For stage monitor applications, the PX1122M and PX1152M feature symmetrical left and right 60°
monitor angles; NL4 connectors on both sides of the cabinet make daisy-chaining multiple speak-
ers simple. An integrated threaded rigging point allows for truss-mount installation using the VSA-1
strong-arm accessory.
Both enclosures are constructed of 18-mm, 13-ply plywood using tongue and groove joints and
EVCOAT for long-term reliability.
accessories:
The optional VSA-1 strong arm adjusts to fit both PX1122M and PX1152M. Shown on left with optional TCA-1 truss clamp.