Epson Artisan 730 - Manual (Page 4)

4 About Your Product
■ Press x Menu to make special settings. The touch panel retains the settings from the
last time it was used. If you want to start over, simply press y Stop/Reset to clear
settings for the mode you’re using.
■ The blue status light at the bottom of the touch panel flashes when the product is
printing or performing routine maintenance. If it flashes rapidly, check the product
for error messages.
Tip: To turn off the “beep” heard when you press a button, or to reduce its
volume, press l or r to select
Setup , press OK > Printer Setup > OK > Sound
> OK , and adjust one of the settings.
You may see the following icons on the screen:
Icon Meaning
The product is connected to a wired network.
The product is connected to a wireless network.