M-AUDIO BX4BT 4.5" 120W Studio Monitors (Pair) - Manual (Page 6)

6
Front Panel
1.
Tweeter: This outputs the high
frequencies.
2. Woofer: This outputs the low
frequencies.
3. 1/8" (3.5 mm) TRS Aux Input: This
stereo 1/8” (3.5 mm) TRS input can
be used to connect a CD player,
MP3 player, or other audio source.
4. Headphones: Connect your 1/8”
(3.5 mm) headphones to this output
to hear the mix through your
headphones. Note that while
headphones are connected to BX4
BT, you will not be able to hear
sound out of your speakers until the
headphones are disconnected.
5. Power/Bluetooth LED: This LED will illuminate when the speakers are turned on. When
pairing to a Bluetooth device the LED will flash blue, and when pairing is successful it will
be lit solid blue.
6. Vol/Power: This knob is used to turn the speakers on and adjust their volume. To turn on,
simply turn up the knob. You will feel a click when the speakers turn on. A LED on the
speaker will illuminate. To turn off, simply turn the volume all the way down; the LED will
turn off to let you know that the speakers are off.
Pairing a Bluetooth Device
1. Turn on your Bluetooth device.
2. Power on BX4 BT and press the Bluetooth button to go into pairing mode to search for
Bluetooth devices. You will know you are in pairing mode when the Power/Bluetooth LED
is flashing blue.
Note: If you have previously paired a device, BX4 BT will reconnect automatically.
3. Navigate to your Bluetooth device’s setup screen, find BX4 BT and connect. If your
Bluetooth device prompts for a pairing code, enter 0000 .
4. The Power/Bluetooth LED will be lit solid blue when a device is “paired” to BX4 BT.
To disconnect a paired Bluetooth device and enter pairing mode, press the
Bluetooth button .
To connect to another device, repeat step 3.
1 1
2 2
3
4
5
6