beautypg.com

Shaft decal warning danger, International, Symbols – Echo SRM - 340 User Manual

Page 4

background image

4

Shaft Decal

WARNING

DANGER

• This unit can be dangerous and cause serious injury if improperly

used. To reduce injury risk to operator, helpers and bystanders,
read and understand the Operator's and Safety manuals.

• Blindness can occur from objects that are thrown or ricocheted even

with shield in place. Operators, helpers and bystanders must wear
ANSI Z87.1 approved eye protection.

• Always wear hearing protection when operating unit.
• Prevent accidental contact with unit and any cutting attachment.

Maintain a 15 m (50 ft.) radius, DANGER ZONE surrounding the
operator. ONLY the operator, dressed in proper protective clothing
should be in the DANGER ZONE.

• Beware of KICKOUT (blade thrust) when using blades. Special

precautions are necessary for blade operation, see your Operator's
and Safety Manuals. ONLY install ECHO approved blades on
Brush Cutters (SRM) models equipped with proper blade shield,
U-handles, harness, blade collar, nut and cotter pin.

• Blade/Cutting attachment does not stop immediately after releasing

throttle. Keep hands and feet clear of blade/cutting attachment
unless engine is shut off and cutting attachment is not moving.

• INSPECT BLADES BEFORE USE.
• DO NOT USE DAMAGED, CRACKED, BENT, DULL OR

IMPROPERLY SHARPENED BLADES.

• Do not remove shields, modify the unit or install attachments or

parts not approved by ECHO. Approved attachment information
and replacement Operator's and Safety Manuals are available from
your ECHO dealer or by writing: ECHO, INCORPORATED, 400
OAKWOOD RD., LAKE ZURICH, IL 60047.

Hot

Surface

Symbol

description/application

Symbol form/shape

Symbol

description/application

Symbol form/shape

"WARNING, SEE

OPERATOR'S

MANUAL

Wear eyes, ears and

head protection

Finger Severing

Wear hand and

foot protection

Safety/Alert

Keep bystanders and helpers

away 15 m (50 ft.).

DO NOT smoke

near fuel.

DO NOT allow

flames or sparks

near fuel.

INTERNATIONAL

SYMBOLS

P/N 89016054130

Carburetor adjustment

- Idle speed

Carburetor adjustment

- High speed mixture

Emergency stop

Fuel and oil mixture

Carburetor adjustment

- Low speed mixture

Primer Bulb

Ignition
ON/OFF

SYMBOL

DESCRIPTION

SYMBOL

DESCRIPTION

Choke Control

"Cold Start"

Position

(Choke Closed)

Choke Control

"Run"

Position

(Choke Open)