Echo SRM - 340 - Manual (Page 26)

26
A
LUBRICATION
Level 1.
Tools Required: 8 mm Open-end Wrench, Screwdriver, Clean Rag.
Parts Required: ECHO
®
LUBE TM 8 oz. (P/N 91014) or Lithium Base
Grease.
Gear Housing
1. Clean all loose debris from gear box.
2. Remove plug (A) and check level of grease.
3. Add grease if necessary. DO NOT over fill.
NYLON LINE REPLACEMENT
Level 1
Tools Required: None
Parts Required: ECHO 0.105 in. Nylon Trimmer Line 15 m (50 feet)
long.
1. Shut engine off. Lay unit on the ground with head assembly up.
2. Hold head firmly and push in cover tabs (A) to remove cover (B)
and spool (C).
A
B
C