Eclipse - Fujitsu Ten AVN5435 EN - Manual (Page 41)

40
Operating the AM/FM radio
How to operate the tuner
Saving radio stations
There are two modes for saving radio stations, manual and AUTO.P, and these modes
operate independently.
Confirm that "AUTO.P" is not displayed in the upper part of the screen.
• If "AUTO.P" is displayed, touching will switch the screen to manual.
#
Use manual tuning or automatic tuning to select the station to be saved.
$
Choose a preset switch and touch it until a beep is heard.
• The radio station (frequency) is set. Touching the preset switch will now tune in the
selected station.
#
Touch until a beep is heard.
• The AUTO.P function will be activated and start automatically selecting stations. A
beep will be heard when automatic selection of stations is completed. On touching
again, the display will switch to the previously recorded station.
#
Use manual tuning or automatic tuning to select the station to be saved.
$
Choose a preset switch and touch it until a beep is heard.
Saving manually
AUTO.P
Saving with AUTO.P
AUTO.P
AUTO.P
Changing stations saved by AUTO.P