Extron electronic Extron IPL T S4 - Manual (Page 45)

© 2008 Extron Electronics. All rights reserved.
Extron USA - West
Headquarters
+800.633.9876
Inside USA / Canada Only
+1.714.491.1500
+1.714.491.1517 FAX
Extron USA - East
+800.633.9876
Inside USA / Canada Only
+1.919.863.1794
+1.919.863.1797 FAX
Extron Europe
+800.3987.6673
Inside Europe Only
+31.33.453.4040
+31.33.453.4050 FAX
Extron Asia
+800.7339.8766
Inside Asia Only
+65.6383.4400
+65.6383.4664 FAX
Extron Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Extron China
+400.883.1568
Inside China Only
+86.21.3760.1568
+86.21.3760.1566 FAX
Extron Middle East
+971.4.2991800
+971.4.2991880 FAX
c Chapter 1 : Download and install Global Configurator.
c Chapter 2 : Make the IPL T S cable connections.
1. c Power
2. c Local Area Network (LAN)
3. c Serial devices
c Chapter 3 : Create a Global Configurator project file. Add
and configure a device. Build and upload the GC project
file. Launch the GlobalViewer ® interface.
1. c Download device drivers.
2. c Create a new Global Configurator project file.
3. c Add a device.
4 c Define the location of the new device.
5. c Save the new Global Configurator file.
6. c Configure contacts.
7. c Configure e-mail.
8. c Assign device drivers.
9. c Set scheduled actions and e-mail deliveries.
10. c Set monitored conditions.
11. c Build the Global Configurator file.
12. c Upload the Global Configurator file.
13. c Change device settings, such as the e-mail server
(if desired).
14. c Launch the GlobalViewer interface.
Setup Guide Checklist