Extron electronic Extron IPL T S4 - Manual (Page 42)

IPL T S Series Interfaces • Software Setup
Software Setup, cont’d
3-22
Launching the GlobalViewer Interface
GlobalViewer is a graphical user interface that is generated by
Global Configurator (GC). When a GC file is built and uploaded
to a GlobalViewer host device, you can launch the GlobalViewer
interface by opening an Internet browser and entering the host
device’s IP address in the browser address field.
Once the GlobalViewer interface is launched, you can monitor
and control all of the devices on your A/V network from the
GlobalViewer host device.
Step fourteen: launch GlobalViewer
To launch GlobalViewer:
1
. Open an Internet browser.
2 . Enter the IP address of a GlobalViewer host device in the
Address field, and press the keyboard's Enter key.
A window appears similar to the one shown below.