Emerson PanelGuard 65 - Manual (Page 2)

Emerson Network Power.com
Emerson Network Power.
The global leader in enabling
Business-Critical Continuity ™ .
AC Power
Connectivity
DC Power
Embedded Computing
Embedded Power
Monitoring
Outside Plant
Power Switching & Controls
Precision Cooling
Racks & Integrated Cabinets
Services
Surge Protection
Liebert Corporation
1050 Dearborn Drive
P.O. Box 29186
Columbus, Ohio 43229
800 877 9222 Phone (U.S. &
Canada Only)
614 888 0246 Phone (Outside U.S.)
614 841 6022 FAX
Via Leonardo Da Vinci 8
Zona Industriale Tognana
35028 Piove Di Sacco (PD)
Italy
39 049 9719 111 Phone
39 049 5841 257 FAX
Emerson Network Power Asia Pacific
7/F., Dah Sing Financial Centre
108 Gloucester Rd, Wanchai
Hong Kong
852 25722201 Phone
852 28029250 FAX
liebert.com
Technical Support
800 288 6169 Toll-Free
607 724 2484 Phone
607 722 8713 Fax
UL 1449 RATINGS
Line to Line to Line Neutral
System Voltage Neutral Ground to Line to Ground
120/208 or 120/240 400 V 400 V 800 V 400 V
208, 240, 277 or 277/480 800 V 800 V 1500 V 800 V
Specifications
Surge Current Capacity
Minimum Tested Single Pulse Surge Current Capacity
Protection Mode Impulses Per Mode Model 100 Model 80 Model 65
Line-to-Neutral > 3,500 > 100,000 A > 80,000 A > 65,000 A
Line-to-Ground > 3,500 > 100,000 A > 80,000 A > 65,000 A
Neutral-to-Ground > 3,500 > 100,000 A > 80,000 A > 65,000 A
Line-to-Line > 3,500 > 100,000 A > 80,000 A > 65,000 A
Per Phase > 7,000 > 200,000 A > 160,000 A > 130,000 A
Enclosure
NEMA 1 rated.
Surface mount dimensions are 12” x 20” x 6”.
Flush mount unit is 12” x 21.5” x 6”.
Weight is 15 lbs.
EMI/RFI Noise Rejection Values
Single Unit Frequency System Installation
34 dB 100 kHz 51 dB
51 dB 1 MHz 94 dB
54 dB 10 MHz 114 dB
48 dB 100 MHz 120 dB
How To Order Liebert Liebert PanelGuard ™ Extension
Duty life cycle tested to survive 20kV, 10kA, IEEE C62.41 Category C3 surge current
with less than 5% degradation of clamping voltage.
All systems EMI-RFI noise or attenuation rejection values are in compliance with test
and evaluation procedures outlined in NEMA LS 1-1992, paragraphs 2.2.11 and 3.11.
Phase configuration Code
1 Ph, 3W+G. 120/240 VAC 120S
3 Ph, 4W+G. 120/208 VAC 120Y
3 Ph, 4W+G. 277/480 VAC 277Y
Other phase configurations available.
Please consult factory.
kA per mode/per phase Code
65 kA per mode, 130 kA per phase 65
80 kA per mode, 160 kA per phase 80
100 kA per mode, 200 kA per phase 100
Trim type Code
Surface mount trim S
Flush mount trim F
Monitoring options Code
Standard Status LEDs only -00
LEDs, Audible Alarm, Counter -01
LEDs, Audible Alarm -02
LEDs, Counter -03
How to construct a Liebert PanelGuard
Extension (LPGE) model # Code
1. Liebert PanelGuard Extension LPGE
2. Phase configuration 120S
3. kA per mode /per phase 65
4. Trim type: surface mount S
5. Monitoring options -01
Sample model #: LPGE120S65S-01
While every precaution has been taken to ensure accuracy and
completeness in this literature, Liebert Corporation assumes no
responsibility, and disclaims all liability for damages resulting
from use of this information or for any errors or omissions.
© 2008 Liebert Corporation. All rights reserved throughout
the world. Specifications subject to change without notice.
All names referred to are trademarks or registered trademarks
of their respective owners.
® Liebert is a registered trademark of the Liebert Corporation.
SL-22065 (R06/08) Printed in USA
Business-Critical Continuity ™ , Emerson Network
Power and the Emerson Network Power logo are
trademarks and service marks of Emerson
Electric Co. ©2008 Emerson Electric Co.
800 288 6169 Toll-Free
607 721 8865 Phone
607 722 8713 Fax