Electrolux COMPETENCE D5701-5 - Manual (Page 10)

10
B) TO SET THE TIMER TO SWITCH OFF
ONLY
i) Ensure the electricity supply is switched ON and
that the correct time of day is displayed, e.g.
10.00am as Fig. 9.
ii) Set the main oven controls to the required
function and temperature.
iii) Place food in the oven.
iv) To set the length of cooking time, press the Time
Selector button until the 'Cook Time' ( )
indicator neon is illuminated. Turn the main oven
increase/decrease selector (
+/-
) until the
required length of cooking time is displayed, e.g. 2
hrs 15 mins as Fig. 10.
v) Release the buttons. The 'Cook Time' indicator
neon ( ) will illuminate.
vi) To check the 'End Time' during the cooking
period, simply press the Time Selector Control
button once and the remaining time will be
displayed, as Fig. 11.
vii) To return the display to the time of day, press the
Time/Temperature button.
NOTE: The Multifunction Selector neon and the
main oven Increase/Decrease Selector neon ( )
will remain illuminated during programme.
4. TO CANCEL AN AUTOMATIC
PROGRAMME
i) To cancel an automatic programme press
the Time Selector button until the 'Cook Time'
( ) indicator neon flashes. Turn the main oven
increase/decrease selector (
+/-
) until the
display reads 0.00 as Fig. 12.
ii) Release the buttons. The 'Cook Time' ( )
indicator neon will flash.
iii) Turn off the oven controls.
iv) The display will return to the time of day.
5. TO RETURN THE APPLIANCE TO
MANUAL
At the end of a timed cooking period, the
indicator neon will flash and an alarm will sound
for up to 2 minutes.
i) To stop the sound press any of the buttons, as
Fig. 13.
ii) ---°C will show in the display.
iii) Turn off the oven controls.
12.15
2.15
Fig.10
10.00
Fig.9
2.15
Fig.11
0.00
Fig.12
Fig.13